Forums/
Gateways
2 hours ago
@mrmanmsk What I’m listing here are only possible causes, so even after you make the adjustments the issue may not be resolved. The key is to mirror-capture traffic and compare the difference between...
0HELPFULS
Forums/
Switches
3 hours ago
@GaRv3 Thank you so much for taking the time to post the issue on the TP-Link community! To better assist you, I've created a support ticket via your registered email address and escalated it to our...
0HELPFULS
Forums/
Switches
3 hours ago
@CableWhisperer By default, on Omada all VLANs can reach each other and every VLAN can reach the WAN. Your current configuration is basically fine—go ahead and apply it, then double-check that each...
0HELPFULS
Forums/
Gateways
4 hours ago
@flrwrzl Please first disable “Block Ping from WAN” in the location shown, then reboot the router. Additionally, temporarily place the NAS in the DMZ and see if the issue persists. If you have...
0HELPFULS
Forums/
Gateways
5 hours ago
@mhoam Thank you for your suggestion. Regarding your concern, V2 and V2.20 will continue to share the same firmware. I have also forwarded your feedback to the UK website team, urging them to upload...
0HELPFULS
Forums/
Gateways
20 hours ago
@ArnoLa To help assist and streamline the identification of the behavior, we recommend sending an email to forumsupport.usa@tp-link.com with the following information: Subject: [Forum Escalation][ID...
0HELPFULS