if you want your local IP 192.168.0.10 always use Wan2 to go to internet, you have to make policy route Source Ip : 192.168.0.10 Dest IP : don't write anything

Hello You have to make a Policies Routing : Advanced -> Load balancing -> Policy Routing But : - You don't have make a Link Backup, only Load balancing. - If Wan2 is KO, you don't have internet on...

Model : Hardware Version : Firmware Version : ISP : Hello Model : TL-ER6020 V1 Firmware : The last one I have a TL-ER6020 and i have 2 Wan and 1 Lan. I use Failover only. If Wan1 is KO, Wan2 becomes...

Model : Hardware Version : Firmware Version : ISP : Hello Model : TL-ER6020 V1 Firmware : The last one I have a TL-ER6020 and i have 2 Wan and 1 Lan. I use Failover only. If Wan1 is KO, Wan2 becomes...

I think too, but no When i create a policies routing, for exemple PC1 go to Wan1, If Wan1 is down, PC1 have not internet. But all over PC that have not policies routing have internet with Wan2....

Model : Hardware Version : Firmware Version : ISP : Hello I have a TP-R480T+, firmware V9 with 2 wan and one lan. The Load Balancing Work well, but a have a problem. I have make 2 routing Policy for...