antoniooninatoLV2Online
Following: 0Followers: 0
Forums/ Pharos Wireless Bridges
2021-01-21 02:57:41
Re:Cpe510
@Ellib4 this my setup, i have had many tp link routers during the years including the archers which are very good, high power routers, cpe units etc right now my 2 wbs210 are disconnected because i...
0HELPFULS
Forums/ Pharos Wireless Bridges
2021-01-20 16:16:43
Re:Cpe510
@Ellib4 the part that i don't understand, is why you have both dishes using the same channel i think is better to assing a diferent channel for each dish that way they don't affect each other signal...
1HELPFULS
Forums/ Pharos Wireless Bridges
2021-01-20 15:30:31
Re:Cpe510
@Ellib4 hi i understand you should change channel width from 20 mhz to 20/40 20 mhz is to give wifi to devices like iphones and ipads and you are using the dishes to recieve not to send anyway those...
0HELPFULS
Forums/ Pharos Wireless Bridges
2021-01-20 03:45:21
Re:Cpe510
@Ellib4 you can do it like that , depending the number of your main router i don't know if you have one main router 192.168.0.1 then you connect 192.168.0.2 192.168.0.3 via lan cable to send internet...
0HELPFULS
Forums/ Pharos Wireless Bridges
2021-01-20 03:37:03
Re:CPE210 setup - Extending my network but doesn't appear to be connecting to existing wifi
@Eldridge did you tried disabling the DHCP server on the CPE unit? sometimes having DCHP enable on both the main router and the extender can cause problems simply let the main router assign the...
1HELPFULS
Forums/ Pharos Wireless Bridges
2021-01-20 03:29:33
Re:Cpe710 UN flash firmware version US, lost frecuencies
@davidmu88 hi to what AP are you connecting, for example if you connect to an ubiquiti AP that has air max enable then the tp link won't be able to connect to that access point i know you are suppose...
1HELPFULS