Don't use bridge mode on TL-WA7510 and TL-WA5210G. 1) Use AP + Client instead. You can enable WDS on the Client if you require transparent communication on Layer 2. 2) Use AP + Universal Repeater...

If you connect a PC directly to the switch, can it get internet access? What mode is the 3 TL-WA5210G working in? For Access Point mode, don't use Quick setup to configure!!! Reset the 3 AP and use...

if I set manually I could access internet but could not log-in on the first AP .254. Mm..that is really strange. Static IP works means at least the link is still fine. But dhcp communication fail to...

Yes TL-ANT2409A can work with TL-WR642G

So the pigtail cable is TL-ANT24PT3 As fotodamaris mentioned, +8dbi omni antenna is not a right choice:( The built-in antenna of TL-WA5210 is 12dBi directional antenna. While with this built-in 12dBi...

There are sub-modes under AP mode:) You can also try Repeater mode. Follow this http://www.tplink.com/en/article/?faqid=348 Hotspot ))))((((( 5210_repeater_mode )))))((( laptops Remember to disable...