Hallo, ich habe zurzeit einen TL-SG3428 und erweitere gerade mein Netzwerk und habe mit einen zweiten TL-SG3428 angeschafft. Nun möchte ich die beiden miteinander verbinden. Ich dachte mir, ich nutze...

@paolo-m Check if it works with another subnet. The subnet used ranges from 192.168.1.1 to 192.168.1.254 If you now want to expand the network and want to reach 192.168.2.1, the subnet 255.255.0.0...

@Andone Thanks so lot. I have now set everything up so far. VLAN 1 (default) Router: 172.16.10.1 Switch: 172.16.10.2 Now I have set up two VLan's. I followed the instructions you suggested. VLAN20:...

@Andone Thank you for your prompt reply My configuration: ER6020: Port 1 (WAN) : Modem from the ISP with static IP 5.10.175.145 Port 5 (LAN) : T1600G The IP-Address is 172.16.10.1 (static) T1600G:...

I use an ER6020 (router) and a T1600G-28PS (switch). The modem (with a static IP) from the internet service provider depends on port 1 (WAN) of the router. The T1600 hangs on post 5 (LAN) of the...

Is it possible to set the speed of the fan? Even without load (PoE) the fan runs very fast and generates a lot of noise.