probitasLV1Online
Following: 0Followers: 0
Forums/ Pharos Wireless Broadband
2019-09-25 07:39:27
Re:Access Point
I would also use VLANS to isolate the telephony from the access points, ideally using one VLAN for WiFi, one for Telephony and a third for management that is not accesible from any client port. Also...
0HELPFULS
Forums/ Omada EAP
2019-08-13 10:23:04
Re:PoE EAP 245v1
They usually come with a POE injector in the box however if you ned a replacement (for a lost or broken one) as POE is a standard any POE injector or switch should be suitable as long as you dont...
0HELPFULS
Forums/ Pharos Wireless Broadband
2019-08-13 09:23:25
Re:2.4 & 5GHz WiFi gear for very long range (and 5 MHz quarter rate)
why does it concern you that output power is specified in dBm? this is a measure of power whereas dB is just a ratio It is of course *possible* to operate a 5GHz link over 100Km with appropriate...
0HELPFULS
Forums/ Pharos Wireless Broadband
2019-08-06 16:28:12
Re:Re:Re:Re:using CPE210 as an access point and a home router as a client at a distance of 5KM
TL-WA5210G: 0~2km TL-WA7210N: 0~5km TL-WA7510N: 0~5km CPE210: 0~5km CPE510: 0~15km+ The maximums above should be considered ideal conditions and will be dramatically impacted by mounting height and...
0HELPFULS
Forums/ Pharos Wireless Broadband
2019-08-06 11:58:43
Re:Re:how can i configured my belkin wireless router with my TL-WA5210G???
@KUROZAWA Did this post answer you question or do you still need help?
0HELPFULS
Forums/ Pharos Wireless Broadband
2019-08-06 11:54:40
Re:CPE610 never find any signal in Survey and never broadcast any signal.
are you using a POE injector or a POE switch? check its capable of providing the required power, these devices may not work in all switches designed for running low power things like IP telephones....
0HELPFULS