I've been using V2 and V3 with many of these units for a number of years and have had zero failures.

Good Day Sir. I was just looking at your signal to noise ratio. Signal to noise is actually a very complicated measurement. However, simply put, if you and I were talking in a noisy room, the level...

Do you have an ethernet tester? It's starting to sound like you are losing the connection to the CPE(s). Did you install the RJ-45 (ethernet) connectors on the cable? If you don't have an ethernet...

The CPE210's work on 2.4GHz, which is a very crowded spectrum. You might try doing a spectrum analyzer, which you can find on the 'Wireless' tab. It will show you what the most crowded channel...

Go to the Wireless page on your Host (Access Point). Under frequency/channel, do a survey of radio frequencies in your area. Find a frequency that is the lowest possible frequency and select it....