@davidperrin1 Yes, the AX58 V2 supports "EasyMesh Network via Ethernet Backhaul". But the AX58 V2 apparently does not support EasyMesh in AP mode when used as the main EasyMesh device. So, if you use...

@davidperrin1 I am not aware of any pre-release firmware for the AX53/AX58 V2. I also don't know how TP-Link decide which features go into which hardware version of their products first. Anyway, if...

@davidperrin1 Hi, Generally, only the routers and hardware versions listed here https://community.tp-link.com/en/home/forum/topic/697572 support EasyMesh in AP mode. Although, the Archer AX58 V1 is...

@raunak1303 Hi, It's indeed a bit odd that TP-Link specifically advertises the Archer TX1U as supporting Linux, but doesn't provide a Linux driver for it. Anyway, it may be a long shot, but you could...

@manjtb350 Hi, Can you please first connect the second Archer AX53 via wireless EasyMesh to the first Archer AX53 and verify that it is working? (albeit at slow speed) Then go to the "Mesh Devices"...

@Spagget Hi, When you say pressing and holding the reset button on the back "did nothing", do you just mean it didn't solve the login problem or did it literally do nothing at all? A successful reset...