dunxdLV3Offline
Following: 1Followers: 0
Forums/ Gateways
2026-10-02 15:19:39
Re:L2TP/IPsec Clients behind Omada Gateway that is also a L2TP/IPsec server
Ok - I found it eventually. The issue was that the IPsec ALG was not enabled in Network Config > Transmission > NAT > ALG. Once it was enabled the VPN started working from behind the Omada Gateway.
1HELPFULS
Forums/ Gateways
2026-10-02 14:48:05
L2TP/IPsec Clients behind Omada Gateway that is also a L2TP/IPsec server
I have successfully set up L2TP/IPsec servers on my ER707-M2 gateways. I am using these VPNs for remote access to branch office sites if our IT team needs to access things on the local network...
0HELPFULS
Forums/ Controllers
2025-12-09 16:37:24
Re:Unable to update OC200 v1 to v 6.0.0.34 version
I've had more luck downloading the most recent firmware available on the TP-Link site for the OC200 v1 (OC200(UN)_V1_1.37.10 Build 20251118), logging in directly to the OC via it's IP address then...
0HELPFULS
Forums/ Controllers
2025-12-08 11:23:05
Re:OC200 upgrade to 1.37.10 Build 20251118 Rel.39419 failing
I wish it worked consistently for me - I've had 4 OC200s (both v1 and v2) fail in the same way with this update - see this thread.
0HELPFULS
Forums/ Controllers
2025-12-08 11:20:54
Re:Unable to update OC200 v1 to v 6.0.0.34 version
Third time attempting to update my nearest controller has failed in exactly the same way. Start upgrade of OC200 v1 or v2 from Omada Cloud to 6.0.0.36. Controller interface stops responding either...
0HELPFULS
Forums/ Controllers
2025-12-05 22:40:57
Re:Unable to update OC200 v1 to v 6.0.0.34 version
@GRL my Omada switches are all adopted by an Omada Controller on each site so I don't think this is an option. Unless I misunderstand what you mean? Is this something I can enable at the sites that...
0HELPFULS
123...