@terziyski I checked that in different way. I joined one wireless device and assigned manual IP in the range of 192.168.1.X and other devices were joined ang recevied IP addresses from DHCP pool. I...

@terziyski Namaste, I tried this on Archer C6 version 4 router. I changed mask to 255.255.254.0 and configured DHCP pool from 192.168.0.2 to 192.168.1.200. I saved this and did not give an error.!...

@terziyski Hello, Our aim that our 250 devices should get IP addresses from the DHCP pool. These 250 devices won't generate any Internet traffic. They all will send data to an application running on...

Hello everyone, We have a network where we have one old TP-link router (TL-840N) as Internet gateway router with IP 192.168.0.1/24. We have place total 21 Archer C6 router in network as access point...

Hello Everyone, Happy new year...!!! We are facing a weird issue in our network. We are using TL-ER7206 as our Internet gateway router, it's LAN ip address is 172.21.21.21/16. DHCP range is from...

@Hank21 Yes, I have manually configured DNS1 & DNS2 as you suggested. Kindly check the attached snapshot. Regards, Sagar Patel