MGergelyLV1Online
Following: 0Followers: 0
Forums/ Omada EAP
By jonas 2021-02-10 03:27:55

[Solution] EAP235-Wall EAP230-Wall: Wireless clients connect to SSID with VLAN can't get IP address

Hi Guys, We find a VLAN issue of the EAP235-Wall. If we enable the VLAN in the wireless SSID and the VLAN in three downlink LAN ports in the same time, the wireless clients connect with the VLAN SSID
Forums/ Omada EAP
By obadvw 2021-07-02 16:17:32

EAP235-Wall SSID and VLANs issue

i have 2 access points EAP235-Wall from the cloud controller , i created 2 SSID on different VLANs but they never work if you assign VLANs ID to the Acces point LAN ports it work , but not the wireles

Re:CONFIG VLAN WITH ACL

ATPackaging wrote @R1D2 Could you explain how to do it? @ATPackaging Hello, I have a very similar problem, I need to deny all access between vlan's and then allow specific host to connect each other.
Forums/ Business Switches (Standalone)
By ceecko 2021-06-03 14:29:01

How to configure ACL to prevent inter VLAN communication

We're trying to block inter VLAN (across VLAN) communication. We'd like to have VLAN 10 for one department and VLAN 20 for other department whereas they should not be able to communicate with each oth
Forums/ Requests & Suggestions
By MGergely 2021-07-08 07:50:38

Feature request for VPN/IPSec, HMAC-SHA2 and AES-GCM, the current is not secure!

Dear TP-Link, The MD5 and SHA1 is not safe anymore. Please use/implement HMAC-SHA1/SHA2 and AES-GCM (compatible) or ChaCha20-Poly1305 (faster on ARM than AES) more info here. The TL-SG3428 V2 switch a
Forums/ Business Switches (Standalone)
By MGergely 2021-07-06 22:01:30

ACL not work, BUG on TL-SG3428 V2

I tried to create an ACL entry to block a port (TCP 8888) on an IP address (10.10.10.10/32) (because it also not blocked/controlled via the router: ER7206 (TL-ER7206) ) I applied that on all port (or
12