EAP 220 Missing from TP-Link Controller (Version: 2.5.4)
Set the channel from auto to manual and then the listed eap220 earlier disappeared from under the 'access point' tab. But the 'client' tab stil showing clients listed under those missing acces point.
Anyone encountered this before and how to bring it back?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@theArties, did you select »All« under the »Access Points« tab? Is the EAP220 shown in disconnected or pending state? Or do you say it disappeared completely from all AP lists in the controller?
- Copy Link
- Report Inappropriate Content
Its selected by default, and yes, click again the 'All' to be sure.
Guessing this is a layout bug issue; coz when I clicked on either of the sorting button (circled red), it will switch to the other APs.
And note the headers alignment. this is from FF at 100% zoom.
- Copy Link
- Report Inappropriate Content
@theArties, what do you mean with »it will switch to the other APs«? If you change the sorting order, the APs appear in another order, but do not disappear.
- Copy Link
- Report Inappropriate Content
@R1D2 Say i have 4 APs- 1,2,3,4
When clicked on 'Name/Mac Address', it will show either AP 1, press again AP 2.
And when clicked on 'TX 2g' or 'TX 5G', it will show either AP 2 or AP 3.
Weird right, and it will never show all 4 APs together.
- Copy Link
- Report Inappropriate Content
@theArties, maybe it helps to try another browser; I never experienced such a behavior.
- Copy Link
- Report Inappropriate Content
It is truly strange if all APs cannot show up. You can try to reboot the Controller, then check if the problem still exists.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1408
Replies: 6
Voters 0
No one has voted for it yet.