packet forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

packet forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
packet forwarding
packet forwarding
2020-03-24 14:40:44 - last edited 2021-04-19 11:24:49
Model: TL-ER6120  
Hardware Version: V1
Firmware Version: 1.0.7 Build 20140113 Rel.63736

Hi!

 

I use an SMB server in my network. The main subnet is: 10.1.1.0/24, and the smb server address is 10.1.1.7

I established the L2TP/IPSEC vpn connection. The vpn address pool is: 10.1.2.10 - 10.1.2.20

I can establish the connection over vpn (form wan1 port), the client os is win10, and my client IP is 10.1.2.10

But I cannot connect my samba server (10.1.1.7) form the win10 client.

I cannot find the packet forwarding (or bridging) setting, on the configuration web interface.

What can I do?

 

Thankk you!

 

Balazs Hejja

 

  0      
  0      
#1
Options
2 Reply
Re:packet forwarding
2020-03-26 01:53:10 - last edited 2021-04-19 11:24:49

@hbpmk 

 

Hi

 

If you want to set port forwarding, you can go to Advanced->NAT->Virtual Server. 

 

But I think you don't need to use VPN and port forwarding at the same time. When you establish VPN, you already could access the resource behind your VPN server.

 

About the problem that cannot access samba server, you can check if you can ping its IP address. 

And I have a beta FW for ER6120V1, if you don't mind, you can try it.

https://static.tp-link.com/2018/201803/20180330/TL-ER6120(UN)_v1_20180326_Beta.zip

  0  
  0  
#2
Options
Re:packet forwarding
2020-03-26 09:43:11 - last edited 2021-04-19 11:24:49

@Andone 

 

Hi!

 

Thank you for your help!

The port forwarding in virtual-server option only from external port to internal port.

 

 

 

I will try the beta FW, but not now, because every employee is in home office :-)

Thanks :-)

  0  
  0  
#3
Options