ER7206 bricked after firmware upgrade failed?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER7206 bricked after firmware upgrade failed?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER7206 bricked after firmware upgrade failed?
ER7206 bricked after firmware upgrade failed?
2021-07-12 12:12:36
Model: ER7206 (TL-ER7206)  
Hardware Version:
Firmware Version: 1.1.0

Hi All,

 

After failed upgrade of ER7206 to V1_1.1.0_20210531-rel64940(beta) the device went to disconnected status on omada, and LEDs didn't light at LAN ports. I've tried to use the emergency mode to recover the firmware (https://www.tp-link.com/de/support/faq/3062/) but the LED of the connected LAN port won't lights up, and I get "network cable unplugged" at the PC. How much time I need to hold the reset button after I plugged in the power cable? Are there any other solution to bring it back to "life"?

  1      
  1      
#1
Options
7 Reply
Re:ER7206 bricked after firmware upgrade failed?
2021-07-12 18:32:35 - last edited 2021-07-12 18:32:56

@Benzol 

I bricked a 605 and the recovery process worked for me no problem.

Are you holding in the reset before applying power? (am sure you are but we have all had our moments lol)

  0  
  0  
#2
Options
Re:ER7206 bricked after firmware upgrade failed?
2021-07-12 18:58:06
Of course I hold before and after too. I tried many times and sometimes more than 2 mins... nothing happens... :/
  0  
  0  
#3
Options
Re:ER7206 bricked after firmware upgrade failed?
2021-07-12 19:11:10

@Benzol 

 

i wish i could remember how long mine took when holding the reset

 

maybe open a command prompt and ping the router ip with the -t command and if you see a ping reply then release the reset button (2 mins does seem long and i don't recall it taking that long)

 

 

  0  
  0  
#4
Options
Re:ER7206 bricked after firmware upgrade failed?
2021-07-12 20:07:45
That's a good idea, I will try it tomorrow, but I don't think anything is work if the leds don't light up.
  0  
  0  
#5
Options
Re:ER7206 bricked after firmware upgrade failed?
2021-08-31 08:21:30

For anyone who has the same problem:

 

Follow the instructions in the FAQ https://www.tp-link.com/de/support/faq/3062/

First put in the cable to a LAN port, change IP manually on your PC (No Gateway input. Just IP and Subnet). Than hold RESET-Button and power your ER7206.

And now important: hold the RESET-Button until the LAN-LEDs of the LAN-port with the cable starts to blink. Release RESET-Button.

Goto: 192.168.0.10 and start the firmware update manually.

 

After that procedure my device worked as before. But for a few minutes I had a small heart attack that the brick would stay a brick.

 

 

  0  
  0  
#6
Options
Re:ER7206 bricked after firmware upgrade failed?
2021-09-25 11:52:20 - last edited 2021-09-25 11:56:39

@Benzol Does not work for me, following the recovery procedure the router comes still up in 192.168.0.1 and not 192.168.0.10 :-( no web interf. no reset possible !! Any ideas anyone ??

Edit: only ting i cen get is a 

404 Not Found

nginx/1.8.1

error

on port 8080

  2  
  2  
#7
Options
Re:ER7206 bricked after firmware upgrade failed?
2021-12-02 19:09:36

@Benzol I have exactly the same problem and nothing I try regarding the reset procedures seems to work to light up the LAN port and create a connection.

 

Did you end up getting it working?

 

I'm close to now sending it back.

  0  
  0  
#8
Options