EAP 660 and EAP 620 - Mesh Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP 660 and EAP 620 - Mesh Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 660 and EAP 620 - Mesh Network
EAP 660 and EAP 620 - Mesh Network
2021-10-26 17:30:03
Model: EAP660 HD  
Hardware Version: V1
Firmware Version: 1.01

Dear Community members

 

I purchased an complete system with Gateway, Switch and the 2 above mentioned APs.

I do need to set up a mesh but unfortunately I cannot find a way to get this working.

 

Aren't both or one of them not compatible with the Mesh Networking?

 

Thanks a lot in advance

Holger

  0      
  0      
#1
Options
3 Reply
Re:EAP 660 and EAP 620 - Mesh Network
2021-10-26 18:40:13

@Holgi 

Functionality in both models with rev 1.0 are unfortunately still in development. In June I've got estimate from support that firmware update with mesh should be released in Q3 2021. But we are already in Q4 and there's no updates besides rumors of unexpected problems during testing.

 

My 3x620HD are also waiting for this feature.

  0  
  0  
#2
Options
Re:EAP 660 and EAP 620 - Mesh Network
2021-11-03 19:16:16

@Holgi Bump, also waiting for EAP620 HD Mesh support.

  0  
  0  
#3
Options
Re:EAP 660 and EAP 620 - Mesh Network
2021-11-04 14:58:36

@Holgi Now I have EAP620HD v1 and EAP265HD at home. Both points are connected by a POE wire to TL-SG2008P. The TL-R605 gateway and the OC200 controller are also on the network. There are about 20 devices in the network. The transition between the points is invisible in any way. It works perfectly. There is a little difference in the work between these points. And it is visible only on the charts.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 887

Replies: 3

Related Articles