OC200 controller - issues with EAPs
I had five EAPs in my house after I managed to run some ethernet cable during some work in the house. I've just bought a OC200 controller to improve the network when using a single SSID. However, having connected and configured the controller (having to reset all EAPs to do this), I've found that only one of the four EAPs I have work with the controller. The others show an error on the Omada web interface: "The device is not compatible with the current controller. To manage the device, update the device first".
I will be completely honest and say I've reached the limit of my technical knowledge getting to this point, and am now stuck in terms of what I need to do (I'm hoping its not to have to buy replacements for 4 of the 5 EAPs as that's not feasible right now).
Any support you're able to provide would be greatly appreciated. Details of what I have is below:
On the Omada app the OC200 is listed as Controller Model: OC200 1.0, the controller version: v4.4.6; for,ware 1.9.3 Build 20210914 Rel 39903
The following ARE NOT working
EAP115 - 3.5.0 Build 20200113 Rel. 64098
EAP110(EU) v4.0 3.5.0 Build 20200113 Rel. 63870
EAP110-Outdoor(EU) v3.0 3.3.0 Build 20190301 Rel. 37118
The following IS working
EAP225-Outdoor(EU) v1.0 5.0.4 Build 20210520 Rel. 67983