Business Community > Controllers > ER605 able to use more than one WAN IP address
< Controllers

ER605 able to use more than one WAN IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 able to use more than one WAN IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 able to use more than one WAN IP address
ER605 able to use more than one WAN IP address
2022-07-18 15:14:26
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.2.1

Will your Omada router product line EVER be able to work with ISPs that provide more than one WAN IP address?

I have a ER605 managed by OC200.

 

My ISP gave me 8 IP addresses (6 usable), but using your Router only allows me to use 1 IP address, instead of the 6.

I cant NAT to other devices on different addresses

i.e.

ISP 1.2.3.4/28

 

GW 1.2.3.5

web 1.2.3.6

Cameras 1.2.3.7

FTP site 1.2.3.8

 

I dont mean two seperate ISP on two seperat WAN ports, I mean multiple IP addresses on one WAN port

 

  2      
 
  2      
 
#1
Options
4 Reply
Re:ER605 able to use more than one WAN IP address
2022-07-19 05:38:42

SAZNM wrote

Will your Omada router product line EVER be able to work with ISPs that provide more than one WAN IP address?

I have a ER605 managed by OC200.

 

My ISP gave me 8 IP addresses (6 usable), but using your Router only allows me to use 1 IP address, instead of the 6.

I cant NAT to other devices on different addresses

i.e.

ISP 1.2.3.4/28

 

GW 1.2.3.5

web 1.2.3.6

Cameras 1.2.3.7

FTP site 1.2.3.8

 

I dont mean two seperate ISP on two seperat WAN ports, I mean multiple IP addresses on one WAN port

 

Hi  @SAZNM 

 

For now, only standalone mode supports One-to-One NAT.

 

Controller will support this function in future, it's already in roadmap. 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  2  
  2  
#2
Options
Re:ER605 able to use more than one WAN IP address
2022-07-19 10:55:13

Look forward to that, I have four public IP addresses that were given to me but can only use one on the same setup (ER7206 as the router). My old Draytek router just let me specify the range as virtual IPs, worked really well.

 

+1 from me

  1  
  1  
#3
Options
Re:ER605 able to use more than one WAN IP address
2022-11-27 19:36:10
Where can I find this Omada roadmap?
  1  
  1  
#4
Options
Re:ER605 able to use more than one WAN IP address
2023-01-28 07:24:42

  @SAZNM It can be done... Set up an OPNSense or PFSense box in front of your OMADA router to perform the connection and NAT each WAN IP with one-to-one NAT to a vLAN interface.. Pass that to a small managed switch and mark each port going to the OMADAwith a corresponding untagged vLAN.. Bingo.. 1 IP per port..

  1  
  1  
#5
Options

Information

Helpful: 2

Views: 2862

Replies: 4

Related Articles
Configure ER605, so that some devices can only use one particular WAN interface
454 0
Configure ER605, so that some devices can only use one particular WAN interface
8007 0
 ER605 wrong WAN IP Address?
861 0
ER605 Unknown IP Address in the traceroute
2044 0
How can I use a different IP network in the ER605 router?
749 0
ER605 - "Use Fixed IP Address" (DHCP Reservation) Still not working after new Firmware
3038 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.