Can't see wired clients with a C200 and EAP115 and EAP230

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't see wired clients with a C200 and EAP115 and EAP230

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Lorridao

2022-09-17 07:39:30

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-06-26

Can't see wired clients with a C200 and EAP115 and EAP230

2022-09-17 07:39:30

Tags:

Model: OC200

Hardware Version:

Firmware Version: 5.5.7

Hello,

I have an OC200 with 3 EAP115 and 1 EAP230 and all the wireless works fine but I can't see the wired clients connected directly to the EAPs ports. This clients works but doesn't appear in the console.

Can you help me?

Thanks!

Sergio

1 Reply

Somnus

LV5

2022-09-19 06:32:33

Posts: 1212

Helpful: 219

Solutions: 72

Stories: 0

Registered: 2021-06-14

Re:Can't see wired clients with a C200 and EAP115 and EAP230

2022-09-19 06:32:33

@Lorridao

I have Omada switch and EAPs, from my testing the device connected to the EAP Ethernet port will not be detected as "connected to the EAP", but shows as "connected to the switch" directly. So the LAN port on the EAP is not "controlled" by the EAP, but just a bridge port to the front switch.

I guess your switch is not Omada so the controller cannot detect it.

Can't see wired clients with a C200 and EAP115 and EAP230

Can't see wired clients with a C200 and EAP115 and EAP230

Information

Voters 0

Tags