setting static IP on 2210MP switches in Omada setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

setting static IP on 2210MP switches in Omada setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
setting static IP on 2210MP switches in Omada setup
setting static IP on 2210MP switches in Omada setup
2022-12-18 00:22:47

Have an Omada network with several 2210mp switches and a 2428 switch. want to set them up with static addresses and cn find no option for this is the device config tab.

  0      
  0      
#1
Options
2 Reply
Re:setting static IP on 2210MP switches in Omada setup
2022-12-18 16:15:31

Same here on my TL-SG2218

 

I could not do it through the OC200 web interface. However, using the (android) app, I could

  0  
  0  
#2
Options
Re:setting static IP on 2210MP switches in Omada setup
2022-12-18 23:46:30 - last edited 2022-12-18 23:48:07

  @swatton In the switch's Config tab of its settings.  Expand VLANs, one of the VLANs will have a blue circular icon (the management VLAN), click the edit icon for that VLAN.  In the Edit VLAN, is the selection box to "Use Fixed IP Address", that will expand for inputting the static IP you want.  Apply all the settings (you may need to reboot the switch to release the IP and get the static IP from the DHCP).  In the DHCP reservation in the Services settings, you should now see the reserved IP and a MAC, there you can set a name/description of that reservation.

  0  
  0  
#3
Options