Old thread Monitor 2nd WAN status on ER605 using SNMP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Old thread Monitor 2nd WAN status on ER605 using SNMP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Old thread Monitor 2nd WAN status on ER605 using SNMP
Old thread Monitor 2nd WAN status on ER605 using SNMP
2023-03-10 14:48:17
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

Hello everyone, 

 

I want to know if there are some evolutions after this thread 

 

https://community.tp-link.com/en/business/forum/topic/511976

 

I've just installed a brand new appliance ER605 and I'm not able to understand where is the Wan2 interface. 

 

this is the list of my interfaces now 

with this command:  snmpwalk -v 1 -c pub 192.168.10.1 .1.3.6.1.2.1.2.2.1.2

 

IF-MIB::ifDescr.1025 = STRING: default/lo

IF-MIB::ifDescr.1026 = STRING: default/eth0

IF-MIB::ifDescr.1027 = STRING: default/eth1

IF-MIB::ifDescr.1028 = STRING: default/ip6tnl0

IF-MIB::ifDescr.1029 = STRING: default/sit0

IF-MIB::ifDescr.1030 = STRING: default/gre0

IF-MIB::ifDescr.1031 = STRING: default/gretap0

IF-MIB::ifDescr.1032 = STRING: default/bond0

IF-MIB::ifDescr.1033 = STRING: default/veth0

IF-MIB::ifDescr.1036 = STRING: default/br-lan

IF-MIB::ifDescr.1037 = STRING: default/eth1.4094

IF-MIB::ifDescr.1038 = STRING: default/eth1.4093

IF-MIB::ifDescr.1040 = STRING: default/eth1.10

IF-MIB::ifDescr.1041 = STRING: default/eth1.10

IF-MIB::ifDescr.1042 = STRING: default/eth1.10

IF-MIB::ifDescr.1043 = STRING: default/eth1.4093

IF-MIB::ifDescr.1044 = STRING: default/eth1.10

IF-MIB::ifDescr.2049 = STRING: vnet/lo

IF-MIB::ifDescr.2050 = STRING: vnet/ip6tnl0

IF-MIB::ifDescr.2051 = STRING: vnet/sit0

IF-MIB::ifDescr.2052 = STRING: vnet/gre0

IF-MIB::ifDescr.2053 = STRING: vnet/gretap0

IF-MIB::ifDescr.2058 = STRING: vnet/veth1

IF-MIB::ifDescr.2059 = STRING: vnet/eth0.1

 

Thanks for your support. 

 

Michele

 

 

  0      
  0      
#1
Options
3 Reply
Re:Old thread Monitor 2nd WAN status on ER605 using SNMP
2023-03-11 09:05:09 - last edited 2023-03-11 09:05:42

I think

IF-MIB::ifDescr.1037 = STRING: default/eth1.4094

IF-MIB::ifDescr.1038 = STRING: default/eth1.4093

are the two WAN interfaces, 1038 = WAN, 1037 = WAN1/LAN.

But I wouldn't stake my life on it

  0  
  0  
#2
Options
Re:Old thread Monitor 2nd WAN status on ER605 using SNMP
2023-03-13 08:06:00

  @Michele3421 

 

unfortunately not. 

 

I can see traffic only on eth0 and eth1 .. I don't understand where is Wan2 

 

Thanks for your response anyway. 

 

Michele

 

  0  
  0  
#3
Options
Re:Old thread Monitor 2nd WAN status on ER605 using SNMP
2023-03-13 08:29:09 - last edited 2023-03-13 08:30:21

  @Michele3421 

 

I can help I highlighed the only ones active

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 495

Replies: 3

Related Articles