Hello,

Recently did a hardware upgrade and got a MR600, TP 9 Switch POE for our setup that has 4 different AP's

Current issue is that all AP's connections seems to be limited to 10mbps (negotiated speed) on our Omada controller

(s

We live on a very off location so our speed usually lands around 50-150mbps

Current setup is

MR 600 (source) to 9 POE switch to  1. Controller 

                                                                     2. AP
                                                                     3. AP

                                                                     4.AP

                                                                     5. AP

Troubleshooting we've done so far is connected ethernet cable directly via MR 600 (source) to desktop and got around 40mbps

All AP's we get around 10mbps

Desktop to POE switch with ethernet we get 10mbps

Even changed the cable between MR 600 and POE switch and got the same result. (CAT 5/CAT 6)

Any suggestions?