TL-ER7206 doesnt add load to WAN2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER7206 doesnt add load to WAN2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER7206 doesnt add load to WAN2
TL-ER7206 doesnt add load to WAN2
2023-04-20 23:08:08 - last edited 2023-04-28 10:19:28
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.3.0

I have 3 wan configuration. I have setuped load balancing mode. Load balancing weights are WAN1 600, WAN 2 70 and WAN3 50 (as internet speeds in reality are for download side). When i use full load to router when i load something for some reason router only add load to WAN1 and WAN3, WAN2 only stays at idle. How to fix this. All WAN's are online and online test ip is set for Cloudflare.

 

For example when i load GTA V from steam WAN2 stays at zero.

I think there is some kind of bug in TL-ER7206 or/and OC200 firmware. Settings has not been changed. This system has worked before.

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-ER7206 doesnt add load to WAN2-Solution
2023-04-28 10:18:43 - last edited 2023-04-28 10:19:28
Thanks... Seems to be the TL-ER7206 or OC200 wasnt the problem... the isp is the problem. TL-ER7206 showed the connection to be online but it was too unstable so TP-Link didnt move any load to WAN2 becouse of that. Thanks :)
Recommended Solution
  0  
  0  
#9
Options
7 Reply
Re:TL-ER7206 doesnt add load to WAN2
2023-04-21 02:43:43

Hello @satelite,

 

1. May I know the firmware version of your OC200?

 

2. Are you sure this issue start to happen after you upgraded the firmware?

Could you tell me which exact version of firmware on which exact device the issue occurred after upgrading?

 

3. Have you tested the data transmission on several client devices?

Could you use the "tracert" command to test? A screenshot of the test result will be helpful.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:TL-ER7206 doesnt add load to WAN2
2023-04-21 10:06:36 - last edited 2023-04-21 10:08:43

  @Hank21 

1.

5.9.32

 

2. Actually last larger data dump is from january for that WAN2... i thinked that i havent been using so much data to multi-wan activate this connection. i Tried full load to my network and WAN2 stays at idle.

 

3. Yes several devices at same time, full load with multiple connections at same time. Another WANs stays at full load but WAN2 idles. I dont have all of the devices available to make new larger test at the moment but somehow TP-Link uses only WAN1 or WAN3. With my settings this has been working before. Nothing about multi-wan settings has not been changed.

  0  
  0  
#3
Options
Re:TL-ER7206 doesnt add load to WAN2
2023-04-21 10:08:21
I just backupped larger dump of files to my cloud with multiple connections at same time... same thing. It uses only WAN1 or/and WAN3 with full capacity of those WANs
  0  
  0  
#4
Options
Re:TL-ER7206 doesnt add load to WAN2
2023-04-23 03:32:06

Hello @satelite,

 

Could you use the "tracert" command to test and share the screenshot with us?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:TL-ER7206 doesnt add load to WAN2
2023-04-24 00:36:56
Only with wan2 online or all WANs online at same time?
  0  
  0  
#6
Options
Re:TL-ER7206 doesnt add load to WAN2
2023-04-24 03:21:09

 Hello @satelite

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230437115, please check your email box and ensure the support email is well received. Thanks!

Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.

 

Many thanks for your great cooperation and patience!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#8
Options
Re:TL-ER7206 doesnt add load to WAN2-Solution
2023-04-28 10:18:43 - last edited 2023-04-28 10:19:28
Thanks... Seems to be the TL-ER7206 or OC200 wasnt the problem... the isp is the problem. TL-ER7206 showed the connection to be online but it was too unstable so TP-Link didnt move any load to WAN2 becouse of that. Thanks :)
Recommended Solution
  0  
  0  
#9
Options