Uanble to upload the new BETA Firmware ER8411 v1.0.4
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Uanble to upload the new BETA Firmware ER8411 v1.0.4
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi there,
I have an issue to upload the bin file to my router. I starts till 5% then jumps over to 95% an then abort with error message: upload failed.
Does it workk for somebody?
Greetimgs
Thorsten
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@crrodriguez This is the solution.
I made a backup (which I luckely didn't need).
Forgot the device, Pushed 10 seconds the reset button for factory reset. Weired my Laptop with the router directly and unwired all other devices , Opens the webpage (192.168.0.1). Enter new credentials (not forget, you need this later while adopting the device again). Upgrade the device. After restart, configured the former IP Adress of the device. Restart it again. Weired all switches and the OCS controller. Adopt the router, and that it is.
New frimware availabable and FINALLY AFTE LONG TERM OF WAIT AND PATIENCE. I have now a router which can use custom Dyndns Services.
Thanks a lot to all
Thorsten
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Using OC200 Hardware Controller.
No Idea, what cause the problem.
Tried to upload with different browser, same problem.
Restarted the ER8411, but nothing helps...
Greetz Thorsten
- Copy Link
- Report Inappropriate Content
Strange. You have unzipped the file? Is router and controller on same network?
- Copy Link
- Report Inappropriate Content
yes, unzipped.
Got only the .bin file.
Restarted the Controller, renamed the file,....not succesfully
Controler and Router are in the same VLAN. Client is in diffrent VLAN, but with full access.
Thorsten
----
Update: Tried it from different client, upload breaks at 19%.....crazy.
- Copy Link
- Report Inappropriate Content
@TReimann Did you reboot the router ? what's the current memory consumption ?
- Copy Link
- Report Inappropriate Content
you probably have some communication problems between router and controller, port 443 on controller must be available to the router, or you have a corrupt file.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@ all
Thanks for your support
@crrodriguez I have restarted several times, Memory usage ia about 60%.
@MR.S I tried it from several clients and ways (local + Omada Cloud) with different files, every time the same problem. The upload over the external connection breaks at 95%.
@Virgo Yes, I tried it yesterday, but I am not allowed to manage the router in a direct connection, when it is adopt to a controller. I need to get the controller to "forget" about the router and then update it in standalone mode. I plan to do so tomorrow after work.
Thanks
Thorsten
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@crrodriguez I have same problem. OC300 plugged in to ER8411 LAN-port, both rebooted, and failed to upload.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1530
Replies: 14
Voters 1
