TL-SG2008P v2 Not on Allow List
I recently bought Omada stack of ER7206 router, 2x SG2008P switches and 3 EAP670. Currently using Cloud Based Controller (but plan to by OC200).
The router adopts all devices except one of the switches, supplier sent me one V2 switch and one V3 switch (not by request). V3 is added no problem but when I try to add the V2 switch I get the Not on Allow List error and unable to adopt.
Any suggestions?
TIA
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @JeremyT
Thanks for posting in our business forum.
Please refer to the list: Devices Supported by Omada Cloud-Based Controller
Not all devices are supported by the Omada Cloud-based Controller.
Recommend you contact your supplier for an exchange or wait for the OC200.
- Copy Link
- Report Inappropriate Content
Hi @JeremyT
Thanks for posting in our business forum.
Please refer to the list: Devices Supported by Omada Cloud-Based Controller
Not all devices are supported by the Omada Cloud-based Controller.
Recommend you contact your supplier for an exchange or wait for the OC200.
- Copy Link
- Report Inappropriate Content
@Clive_A Thank you for confirming, if the v2 supported by the OC200 then I will wait as it should arrive this week.
- Copy Link
- Report Inappropriate Content
Hi @JeremyT
Thanks for posting in our business forum.
JeremyT wrote
@Clive_A Thank you for confirming, if the v2 supported by the OC200 then I will wait as it should arrive this week.
Definitely. The OC200 takes all into adoption. Unlike the CBC which limits certain hardware versions. OC200/300 or software controller can take all Omada compatible into adoption.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 484
Replies: 3
Voters 0
No one has voted for it yet.