Dual Nic and Omada POE switches
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I currently have system as follows:
1. Main router is using VLAN with 192.168.10.1/ 20.2/ 30.0 as 3 vlans
2. I have a computer based Blue iris surveillance system with a 2nd NIC which I have set to 192.168.55. x. It is isolated from the internet and has 8 POE cameras. Using the computer, I can access this over the 192.168.20.X as my computer server via wireless. There is a dedicate POE unmanaged switch that connects the computer server to the switch.
My question is this.
1. Can I use an OMADA POE switch with this configuration using the omada controller? While there is no real need to monitor the dedicated POE switch and cameras, it would be great if I could use a 16 Port POE switch to manage both the IP cameras and perhaps 3 Omada wireless access points.
Thanks for any advice.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @lucianp
Thanks for posting in our business forum.
lucianp wrote
thank you I am setting up the system this week ER707-M2 and the OC200 controller TL-SG2008P - I plan to use this for a few hardwired devices and to power a few wifi access points TL-SG3428MP - I want to dedicate this to my POE cams and isolate the cams from the internet via a second nic. The Blue iris system is on a dedicated PC My question is how do I connect the TL-SG34282MP to the omada infrastructure. Currently, I have the 2nd NIC connected directly to my existing PC and not the router. Willl the OMADA controller be able to recognize it? The vlans that I have are 192.168. 1.x,, 20.x, 30, xx the second NIC is set to 192.168.55.. x and is not connected to the internet but obviously is in the computer. Thanks for the configuration advice
How to Configure VLAN on TP-Link Switch
Check this guide and I think it resolves what you asked.
- Copy Link
- Report Inappropriate Content
Hi @lucianp
Thanks for posting in our business forum.
Yes, you can. Adding a new switch does not hurt anything.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @lucianp
Thanks for posting in our business forum.
lucianp wrote
Thank you very much, In this sceanario, can I either: 1. replace the dedicated unmanaged with a managed OMADA POE or 2) Use a larger managed POE switch ( with appropriate power calculation ) and manage the 2 NICS with one switch?
Correct. Either way would work for you. It depends on and weighs on what's your future plan for your network.
- Copy Link
- Report Inappropriate Content
thank you I am setting up the system this week ER707-M2 and the OC200 controller TL-SG2008P - I plan to use this for a few hardwired devices and to power a few wifi access points TL-SG3428MP - I want to dedicate this to my POE cams and isolate the cams from the internet via a second nic. The Blue iris system is on a dedicated PC My question is how do I connect the TL-SG34282MP to the omada infrastructure. Currently, I have the 2nd NIC connected directly to my existing PC and not the router. Willl the OMADA controller be able to recognize it? The vlans that I have are 192.168. 1.x,, 20.x, 30, xx the second NIC is set to 192.168.55.. x and is not connected to the internet but obviously is in the computer. Thanks for the configuration advice
- Copy Link
- Report Inappropriate Content
Hi @lucianp
Thanks for posting in our business forum.
lucianp wrote
thank you I am setting up the system this week ER707-M2 and the OC200 controller TL-SG2008P - I plan to use this for a few hardwired devices and to power a few wifi access points TL-SG3428MP - I want to dedicate this to my POE cams and isolate the cams from the internet via a second nic. The Blue iris system is on a dedicated PC My question is how do I connect the TL-SG34282MP to the omada infrastructure. Currently, I have the 2nd NIC connected directly to my existing PC and not the router. Willl the OMADA controller be able to recognize it? The vlans that I have are 192.168. 1.x,, 20.x, 30, xx the second NIC is set to 192.168.55.. x and is not connected to the internet but obviously is in the computer. Thanks for the configuration advice
How to Configure VLAN on TP-Link Switch
Check this guide and I think it resolves what you asked.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 500
Replies: 5
Voters 0
No one has voted for it yet.