TP Link Switch not booting
I am unable to get the firmware version since the unit is now broken. Only the power LED comes up, no other light comes up. When i try to access the switch via a console port, the below are the messages displayed when i try to reset. kindly assist
Hit any key to stop autoboot: 0
**********************************************
* TP-Link BOOTUTIL(v1.0.0) *
**********************************************
Copyright (c) 2021 TP-Link Corporation Limited
Create Date: May 14 2021 - 22:36:15
Boot Menu
0 - Print this boot menu
1 - Reboot
2 - Reset
3 - Start
4 - Activate Backup Image
5 - Display image(s) info
6 - Password recovery
Enter your choice(0-6)
tplink> 5
Images in system:
index Attribute Size Filename
----- --------- ---------- ---------------------
1 (b) 10485760 image1.bin
2 (*) 10485760 image2.bin
----- --------- ---------- ---------------------
(*) - with the Startup attribute
(b) - with the Backup attribute
tplink> 1
Are you sure to reboot the device?[Y/N]:y
rebooting...
Hit any key to stop autoboot: 0
Erasing SPI flash...Writing to SPI flash...done
Begin to startup system, please wait a moment...
Starting kernel ...
L2:(tp_fdb_init)line885, RTL8380 ERROR=3
L2:(adFdbInit)line1585, RTL8380 ERROR=3