monitoring switch - snmp
Good afternoon!
I'm trying to activate SNMP on a T2600G-28TS switch, but without success.
I can monitor other switches that I manage through Omada without any problems.
Monitoring is done by another network that connects via VPN to the devices.
I have already activated it according to the documentation, but I don't know if I need to release the network that will do the monitoring.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @JacksonC
Thanks for posting in our business forum.
If the links are helpful:
https://www.zabbix.com/integrations/tp-link
https://community.tp-link.com/en/smart-home/forum/topic/605022
- Copy Link
- Report Inappropriate Content
@Clive_A Good morning; Thanks for the answer.
But it didn't help me, I can activate SNMP on the switch, but I can't perform remote monitoring.
I can even ping the remote equipment, but SNMP apparently does not allow me to monitor the switch from an IP outside the network.
The switches I have linked to OMADA do not have this problem.
- Copy Link
- Report Inappropriate Content
Hi @JacksonC
Thanks for posting in our business forum.
JacksonC wrote
@Clive_A Good morning; Thanks for the answer.
But it didn't help me, I can activate SNMP on the switch, but I can't perform remote monitoring.
I can even ping the remote equipment, but SNMP apparently does not allow me to monitor the switch from an IP outside the network.
The switches I have linked to OMADA do not have this problem.
If you expect me to be helpful, please give me some context of your network.
I am confused by "does not allow me to monitor the switch from an IP outside the network."
This is not something usual to do. You should port forward if this is the case.
- Copy Link
- Report Inappropriate Content
Good morning!
I have the network where the switch is located (192.168.0.0/24) to monitor the equipment via VPN through the network (192.168.88.0/24).
I don't know if this could be the reason I can't perform monitoring.
- Copy Link
- Report Inappropriate Content
Hi @JacksonC
Thanks for posting in our business forum.
JacksonC wrote
Good morning! I have the network where the switch is located (192.168.0.0/24) to monitor the equipment via VPN through the network (192.168.88.0/24). I don't know if this could be the reason I can't perform monitoring.
It should not be a problem. If possible, I would recommend you do a test in the same LAN. Then try over the VPN so we need to rule out the possibilities.
You might wanna confirm if ports are allowed on your SNMP server because this SNMP agent is over a VPN tunnel.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 300
Replies: 5
Voters 0
No one has voted for it yet.