Controller upgrade to 5.14.26.1 - Web interface now inaccessible

Controller upgrade to 5.14.26.1 - Web interface now inaccessible

Controller upgrade to 5.14.26.1 - Web interface now inaccessible
Controller upgrade to 5.14.26.1 - Web interface now inaccessible
2024-07-13 17:23:43

After upgrading to 5.14.26.1 the controller UI is no longer accessible.  Startup seems to work

 

 

but attempting to access the web UI gives a blank page with a spinning circle:

 

  0      
  0      
#1
Options
3 Reply
Re:Controller upgrade to 5.14.26.1 - Web interface now inaccessible
2024-07-13 18:09:50

I was able to downgrade to 5.14.20.9, but since the db format has changed I had to start over with configuration.

 

I have not adopted the AP yet, I'm going to wait a bit and see if the AP crashes again while not connected to the controller.

  0  
  0  
#2
Options
Re:Controller upgrade to 5.14.26.1 - Web interface now inaccessible
2024-07-15 08:41:19

  @jhg6308 You can manually delete your browser's cache, use the no-trace mode, or switch to another browser for comparison. I'm guessing that the first startup after the upgrade installation exited during the upgrading database, and then the next startup the database may have been abnormal, rendering it inaccessible.If it is still inaccessible, please send us the log and specify the browser version.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options
Re:Controller upgrade to 5.14.26.1 - Web interface now inaccessible
2024-07-16 00:27:49 - last edited 2024-07-16 00:28:11

@Hank21 I'm running without the controller for a week because I suspect the controller is causing device instability. See https://community.tp-link.com/en/business/forum/topic/675602

  0  
  0  
#4
Options