DHCP fixed ip not work
Hi, I have an Omada network set up:
OC200 Controller (5.14.26.23) + ER605 v2.0 (2.2.6) + Multiple EAPs.
The problem is that I can't assign a fixed IP via DHCP.
My range:
I want to reserve an IP: 172.26.2.50, but the device always takes an IP from the 3.x range. I have tested the old router with the same device and it assigns it perfectly...
On my old router, the dhcp reservation worked perfectly (same network)
Any ideas?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Nah bruh... you gotta setup a VLAN with this subnet 172.26.2.0/24
Assign that VLAN to the port of that client. Then add the DHCP reservation.
- Copy Link
- Report Inappropriate Content
Sure? If the range is 172.26.0.0/22 all devices are on same network.. I cant create vlans (switchs, entire network are old and for this moment is not possible).
A tried also fixed ip in the same range of dhcp and also not work...
- Copy Link
- Report Inappropriate Content
@conver Settings -> Services -> DHCP Reservation. Add an entry to associated the MAC address of the device and the IP you wish it to have. I do the same on my network for things like printers.
- Copy Link
- Report Inappropriate Content
No problem. same config as you, ER605v2
Connection-specific DNS Suffix . : lan
IPv4 Address. . . . . . . . . . . : 172.26.2.50
Subnet Mask . . . . . . . . . . . : 255.255.252.0
Default Gateway . . . . . . . . . : 172.26.0.1
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 258
Replies: 5
Voters 0
No one has voted for it yet.