Home

Forums

Stories

Knowledge Base

Business Community > WiFi > EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

< WiFi

EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

2024-10-21 15:35:43

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-12-10

EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

2024-10-21 15:35:43

Model: EAP225

Hardware Version: V5

Firmware Version: 1.2.1

I don't run controller software all the time. Once in a blue moon I'll run the software and to my surprise all my EAP225 AP's mostly V5 and one V4 have Tx power set to 24db when I had previously set them all to 11db???

Is this something that happens with firmware updates or controller updates?

This isn't cool because I don't want to be bbq'd in my home!

I haven't found any other references to this problem online.

0

0

#1

3 Reply

2024-10-22 06:40:54

Posts: 904

Helpful: 90

Solutions: 338

Stories: 0

Registered: 2024-06-22

Re:EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

2024-10-22 06:40:54

Hi, did you update the controller or the EAP firmware recently?

You may configure it again, and click apply. After that, you can reboot one EAP, see if it will keep the configuration or not.

0

0

#2

LV1

2024-10-22 16:36:30

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-12-10

Re:EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

2024-10-22 16:36:30

@Vincent-TP no updates recently. The V4 is running firmware 5.1.6 and the V5's are running 1.2.1 and controller is 5.13.22 which I should probably upgrade. This is at least second time this has happened.

I rebooted one of the V5's and set to "low" which is 9dbm. After reboot of the EAP it is still at 9dbm.

Just doing a reboot and getting 5.14.32 latest controller....

So far omada has been light years more stable than the ubiquiti garbage I had before.

0

0

#3

2024-10-23 01:43:25

Posts: 904

Helpful: 90

Solutions: 338

Stories: 0

Registered: 2024-06-22

Re:EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

2024-10-23 01:43:25

Thanks for sharing, you may observe for some more time.

You are welcome to post all the time.

0

0

#4