Home

Forums

Stories

Knowledge Base

Business Community > Pharos Wireless Bridges > CPE 510 and 710 - 360 Degree connection

< Pharos Wireless Bridges

CPE 510 and 710 - 360 Degree connection

Srinivas127

9 hours ago - last edited 7 hours ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-11-26

CPE 510 and 710 - 360 Degree connection

9 hours ago - last edited 7 hours ago

Tags: #Pharos Control #Outdoor Wi-Fi Solution #Repeater/Bridge Mode

Model: CPE710 CPE510

Hardware Version:

Firmware Version:

Hi,

We are planning to install CCTV along the perimeter of our Society. At the center we are planning to install a centralized monitoring system. The maximum distance between RX and TX is about 1.2km. Two questions i have

Is it possible to connect CPE 510 with CPE 710. With710, i am assuming for 360 degree coverage i need less CPE at RX
How many CPE are needed at the center. Either 510 or 710.

Thanks

Sri

1 Accepted Solution

Vincent-TP

7 hours ago - last edited 7 hours ago

Posts: 940

Helpful: 91

Solutions: 352

Stories: 0

Registered: 2024-06-22

Re:CPE 510 and 710 - 360 Degree connection-Solution

7 hours ago - last edited 7 hours ago

Hi @Srinivas127

Is it possible to connect CPE 510 with CPE 710. With710

>>>Yes

How many CPE are needed at the center. Either 510 or 710.

>>> To work as the access point, I will recommend CPE510, cause it has a wider wifi range.

The CPE710 is more for point-to-point, and its Antenna Beamwidth is 9° (Azimuth)/7° (Elevation), which is very limited for wifi coverage.

To cover 360 degrees, you may need 3-4 pieces of CPE510.

This is the datasheet of CPE products, you can have a look.

Recommended Solution

1 Reply

Vincent-TP

7 hours ago - last edited 7 hours ago

Posts: 940

Helpful: 91

Solutions: 352

Stories: 0

Registered: 2024-06-22

Re:CPE 510 and 710 - 360 Degree connection-Solution

7 hours ago - last edited 7 hours ago

Hi @Srinivas127

Is it possible to connect CPE 510 with CPE 710. With710

>>>Yes

How many CPE are needed at the center. Either 510 or 710.

>>> To work as the access point, I will recommend CPE510, cause it has a wider wifi range.

The CPE710 is more for point-to-point, and its Antenna Beamwidth is 9° (Azimuth)/7° (Elevation), which is very limited for wifi coverage.

To cover 360 degrees, you may need 3-4 pieces of CPE510.

This is the datasheet of CPE products, you can have a look.

CPE 510 and 710 - 360 Degree connection

CPE 510 and 710 - 360 Degree connection

Information

Voters 0

Tags