I need to connect 3 locations at a distance of 250 to 300 meters
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a project assignment:
I need to connect 3 locations at a distance of 250 to 300 meters.
There is internet at location 1 and I was thinking of putting 2 x CPE210 there and directing it towards location 2 and 3.
At location 2 I would put CPE210 and WiFi camera
At location 3 I would put CPE210 and EAP650-OUTDOOR and 2x Wifi cameras.
Did I choose the right equipment?
My budget is relatively small so I have to be careful in choosing the equipment.
Please advise
Here are the recommended installation configurations. As shown in the image above, you will need 2 pairs of CPE210 and 2 outdoor EAPs.
If your camera is 2.4G, I recommend the EAP110-Outdoor, as it is relatively cheaper. If it's dual-band, you can use the EAP225-Outdoor.
These two EAPs need to be connected in CPE client mode to provide WiFi connectivity for the cameras.
This is the configuration guide for the two CPE210:
How to build a Wireless Network between home and farm using tp-link products
Hi @DrMile
There would be some problem for location 2.
Please draw a map for the three locations, mark their direction and distance, like below:
I will recommend accordingly.
Here are the recommended installation configurations. As shown in the image above, you will need 2 pairs of CPE210 and 2 outdoor EAPs.
If your camera is 2.4G, I recommend the EAP110-Outdoor, as it is relatively cheaper. If it's dual-band, you can use the EAP225-Outdoor.
These two EAPs need to be connected in CPE client mode to provide WiFi connectivity for the cameras.
This is the configuration guide for the two CPE210:
How to build a Wireless Network between home and farm using tp-link products