Business CommunityPharos Wireless BridgesCpe220 settings with starlink gen3 wifi node cable connection
Pharos Wireless Bridges

Cpe220 settings with starlink gen3 wifi node cable connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cpe220 settings with starlink gen3 wifi node cable connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cpe220 settings with starlink gen3 wifi node cable connection
Cpe220 settings with starlink gen3 wifi node cable connection
2025-10-09 23:00:23 - last edited 2025-10-14 08:00:51
Tags: #Outdoor Wi-Fi Solution
Model: CPE220  
Hardware Version: V3
Firmware Version: V3

Hi

 

i have starlink gen 3 with 2 nodes connected via wifi.  
 

I want to connect one node to an outdoor cpe 220 with a cable from the node to the cpe220.

 

The wifi node has good signal -57db.  
 

What setting do I need to configure the cpe 220 with for it to work

0
0
#1
1 Accepted Solution
Re:Cpe220 settings with starlink gen3 wifi node cable connection-Solution
2025-10-14 08:00:48 - last edited 2025-10-14 08:00:51

Hi  @ROAMERNZ 

 

Thanks for posting here.

 

For the node that plugged into the starlink, it should be configured as Access Point mode.

This is a guide:

How to Configure the Access Point Mode on the Pharos device

 

Below is a introduction for your reference:

How to build a Wireless Network between home and farm using tp-link products

 

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Get the Latest Firmware Releases for Omada Routers Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
0
0
#2
1 Reply
Re:Cpe220 settings with starlink gen3 wifi node cable connection-Solution
2025-10-14 08:00:48 - last edited 2025-10-14 08:00:51

Hi  @ROAMERNZ 

 

Thanks for posting here.

 

For the node that plugged into the starlink, it should be configured as Access Point mode.

This is a guide:

How to Configure the Access Point Mode on the Pharos device

 

Below is a introduction for your reference:

How to build a Wireless Network between home and farm using tp-link products

 

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Get the Latest Firmware Releases for Omada Routers Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
0
0
#2

Information

Helpful: 0

Views: 410

Replies: 1

Tags

Outdoor Wi-Fi Solution
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.