Switch or adapter injector
Hello
i am looking for a device switch or poe adapter for power the zlt x17 and to give internet to omada er7212pc please check picture maybe for better understanding
i already have er7212pc and two wifi accespoint and zlt x17. and wich one first i bought poe injector version TL-POE150S but that one keeps stop working after like between 6 or 12 hours. so i replaced the cables and same issue and i think it needs more power like poe +. And or i think because the injector says power data-out where the zlt x17 is connected then from that to data-in is in connflict. or is it just a switch that works any way in or out.

- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I would recommend TL-SG1005P (an unmanaged PnP switch) connected on its port 5 with the er7212p WAN port.

- Copy Link
- Report Inappropriate Content
According to its data specifications ZLT X17 power consumption is less than 18W (DC 12V/1.5A or PoE),
Power budget of TL-POE50S is 15.4W (Max. 48VDC), so ZLT X17 operates at the limit of its power supply.
Better power the ZLT X17 with a DC power supply or use a PoE switch like TL-SG1005P or TL-SG105PE with PoE power budget of 65W.
- Copy Link
- Report Inappropriate Content
Thank you very much for the new info.
So the only option for me is to buy
TL-SG105PE why because the zlt x17 is outdoor on te roof so not possible for dc plug. Also there is no dc plug only usb c.
1. I buy the TL-SG105PE then connect the zlt x17 and the next port connect to omada er1712pc in to the wan. Is it plug and play ?
- Copy Link
- Report Inappropriate Content
I would recommend TL-SG1005P (an unmanaged PnP switch) connected on its port 5 with the er7212p WAN port.

- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@terziyski never mind the picture just showed up i did not see it first.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 112
Replies: 5
Voters 0
No one has voted for it yet.
