Business Community > Switches > 2 Switch hinter einer FritzBox 5530
< Switches

2 Switch hinter einer FritzBox 5530

2 Switch hinter einer FritzBox 5530

2 Switch hinter einer FritzBox 5530
2 Switch hinter einer FritzBox 5530
Wednesday - last edited Thursday
Tags: #Stacking #Configuration
Model: TL-SG2428P   SG2218P  
Hardware Version:
Firmware Version:

Hi,

 

ich möchte hinter einer Fritzbox 5530 mit Glasfaser Anschluss 2 Switch (SG2428p und SG2218P) anschliessen. Einmal für Erdgeschoss und einmal für Obergeschoss. 

Die FB hat 3 Anschlüsse (2x 1GB und 1x2,5GB). Ich habe im Moment kein Endgerät für 2.5GB ausser meinem Arbeitsrechner.

 

Ist es nun besser jeweils 1 Switch an die 1 GB und den Rechner direkt an die FB 2.5GB anzuschliessen oder einen Switch an diesen Port und dann weiter durchreichen ?

 

Grüße

Sebastian

  0      
 
  0      
 
#1
Options
3 Reply
Re:2 Switch hinter einer FritzBox 5530
Thursday

Hi  @Bolle397 

Thanks for posting in our business forum.

The SG2218P and SG2428P only have gigabit SFP ports, so no matter what devices connect behind them, they can only get 1G speed at most.

To help you with further suggestions, may I ask what is your network topology and what kind of network requirements you want to meet?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:2 Switch hinter einer FritzBox 5530
Thursday

Hi  @Hank21 

 

I have 1 Patch Panel in Floor 1 for 16 Wall Outlets an 1 Patch Panel in Floor 2 for 20 Wall Outlets. The FritzBox 5530 is on Fiber with 1Gb.

For 5 Years I have one TL-SG1024 on every Patch Panel.It's works fine.

 

Now  I must have POE for Display, a Camera .....

 

In future I will also replace the Fritzbox. So the 2 Switches should be the first step :-)

 

Greetings

  0  
  0  
#3
Options
Re:2 Switch hinter einer FritzBox 5530
Friday

Hi@Bolle397 

Thanks for your valued reply.

According to your network description, you may try to replace the 2 TL-SG1024 with the SG2218P and SG2428P to provide PoE for your clients as they both have gigabit ethernet and SFP ports.

The computer equipped with 2.5G compatible speed could be connected directly to your main switch, the Fritzbox, with its 2.5G port for higher bandwidth.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 41

Replies: 3

Tags

Stacking Configuration
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.