Business Community > Gateways > ER605 VPN Gateway
< Gateways

ER605 VPN Gateway

ER605 VPN Gateway

ER605 VPN Gateway
ER605 VPN Gateway
2 weeks ago - last edited a week ago
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version:

So I have 100mb+ on the ethernet from my starlink going into my ER605 router on WAN1, but when I ran speed test on ports 2 to 5 all I get is a dreadful 40mb or less every time.

Am I missing something on the configuration? or is the ER605 not a gig switch capacable of passing such speed? 

  0      
 
  0      
 
#1
Options
8 Reply
Re:ER605 VPN Gateway
a week ago

Hi  @B_Star 

Thanks for posting in our business forum.

May I ask the speed test screenshots from your modem and ER605 respectively?

Is your network connection like modem>ER605>clients? Is this a newly installed router or working fine before? What kind of cables did you use for test?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:ER605 VPN Gateway
a week ago - last edited a week ago

 

Hello @Hank21,

Thanks for replying to my query. 

here are the screenshots you requested.

 

Hello @Hank21,

Thanks for replying to my query. 

here are the screenshots you requested.

 

This is WiFi directly connected to the starlink mini dish itself, using starlink app on my phone to do the test.

 

 

This is with the ethernet from the starlink directly connected to the M1 via USB-C to ethernet adapter. (Before going into ER605 WAN port)

 

 

This is with the ethernet directly plugged into any LAN port on the ER605.

 

These are the results.

 

 

 

 

 

 

 

  0  
  0  
#3
Options
Re:ER605 VPN Gateway
a week ago

Hi  @B_Star 

Thanks for the valuable reply.

May I know what is the hardware and firmware of your ER605 V2? You can find this on web page under Status>System Status.

Since it is mentioned that the WAN 1 is used to connect the Internet, you may try to change cables and different WAN ports.

If the firmware of your ER605 is not the latest, you can try to update the firmware with this link as well.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:ER605 VPN Gateway
Monday

  @B_Star 
The model is ER605 v2.20 (UN2.26 n the label) and the firmaware is 2.3.3 Build 20251029 Rel.18054

 

  0  
  0  
#5
Options
Re:ER605 VPN Gateway
Monday
I bought a 23m length from a reputable Amazon seller, and like I said I'm getting 100+mb at the end of this cable before going into the ER605 router, I just wasn't expecting it to drop so much.
  0  
  0  
#6
Options
Re:ER605 VPN Gateway
Monday - last edited Monday

  @B_Star 

 How much does VLANs affect bandwidth if at all? I have three VLANs on the router but all the traffic goes through the hotspot's VLAN. 

  0  
  0  
#7
Options
Re:ER605 VPN Gateway
Wednesday

Hi  @B_Star 

Thanks for the valuable reply.

Basically the VLAN configuration would not affect the bandwidth, but it still depends on your network environment.

If possible, you may try to restore the configuration and reset the ER605 to test speed again.

Or you may refer to this guide for more test and share us with the result: How to use Iperf to test the speed on TP-Link routers​​​​​​​

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options
Re:ER605 VPN Gateway
20 hours ago

  @Hank21 Thanks you so much, I will try those suggestions.

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 191

Replies: 8

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.