Business Community > Wireless > EAP650 desktop, SNMP ifInUcastPkts counts down not up
< Wireless

EAP650 desktop, SNMP ifInUcastPkts counts down not up

EAP650 desktop, SNMP ifInUcastPkts counts down not up

EAP650 desktop, SNMP ifInUcastPkts counts down not up
EAP650 desktop, SNMP ifInUcastPkts counts down not up
a week ago
Tags: #SNMP
Model: EAP650-Desktop  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20251105 Rel. 50852

Have been monitoring the traffic using SNMP and noticed an interface where the ifInUcastPkts count is going down over time and not up.
When the count reaches 0, it returns to counting down from 2^32 (4294967296)

 

It seems to only happen when I use IoT as the name of the SSID. The other SSID I have work fine (Guest, HotSpot, Cam, Bloom).

 

Hoping someone can check if they get the same thing.

Counter is good on the EAP610 which has the same SSiDs.

 

I don't really want to have to change the SSID on 40+ smart/IoT devices.

 

Regards, Phil

  0      
 
  0      
 
#1
Options
3 Reply
Re:EAP650 desktop, SNMP ifInUcastPkts counts down not up
Yesterday

Hi  @oman181 

 

Thanks for posting here.

Is there any issue with the EAP650-desktop's IoT network? If not, I suggest you don’t worry too much about this count.

At the same time, I will also look into the cause of this phenomenon.

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#2
Options
Re:EAP650 desktop, SNMP ifInUcastPkts counts down not up
Yesterday

Hi  @Vincent-TP 

The WIFI works but I like to monitor packets errors and I typically use percentage of packets in error. There are more errors on this AP than others and I am tweaking parameters and moving APs to achieve minimum errors/dropped packets.
Be nice to have a simple calculation like I do on the other EAPs.

  0  
  0  
#3
Options
Re:EAP650 desktop, SNMP ifInUcastPkts counts down not up
17 hours ago - last edited 17 hours ago

Hi  @MrsP 

 

Understood.

 

Thank you so much for taking the time to post the issue on the TP-Link community!
To better assist you, I've created a support ticket via your registered email address and escalated it to our support engineer to look into the issue. The ticket ID is TKID260429811. Please check your inbox and confirm that the support email was received. Thanks!

 

MrsP wrote

Hi  @Vincent-TP 

The WIFI works but I like to monitor packets errors and I typically use percentage of packets in error. There are more errors on this AP than others and I am tweaking parameters and moving APs to achieve minimum errors/dropped packets.
Be nice to have a simple calculation like I do on the other EAPs.

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 82

Replies: 3

Tags

SNMP
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.