Business CommunityControllersOC200(UN) Ver 2.6 keep's on adopting and disconnecting
Controllers

OC200(UN) Ver 2.6 keep's on adopting and disconnecting

OC200(UN) Ver 2.6 keep's on adopting and disconnecting

OC200(UN) Ver 2.6 keep's on adopting and disconnecting
OC200(UN) Ver 2.6 keep's on adopting and disconnecting
Friday - last edited Yesterday
Model: OC200  
Hardware Version: V2
Firmware Version: 2.14.21 Build 20240401 Rel.52577

Hi, looking for help on conncting problem.

This started after a 8 hour power outage.

Some of my devices connect, mis a heartbeat, fail, try to reconnect.

So just fail to connect.

Some just say adopting.

 

I tried one firmware update on the controler, did not help. I have to do these manualy because auto does not work. I relize I am behind, but it had worked great till now.

 

Any sujestions?

 

  0      
0
#1
Options
1 Accepted Solution
Re:OC200(UN) Ver 2.6 keep's on adopting and disconnecting-Solution
Friday - last edited Yesterday

  @Do-what-I-can Do you have a backup of your controller config, or can you take one? If so, I'd recommend resetting and restoring the config to the controller. 

Also, it would help to update to the latest version for the newest version of the controller. 

Check out our subreddit, r/Omada_Networks! Want to help test and give feedback on new products? Sign up for the US Enterprise Beta Program here! Need a ticket? Contact Technical Support
Recommended Solution
  0  
0
#2
Options
2 Reply
Re:OC200(UN) Ver 2.6 keep's on adopting and disconnecting-Solution
Friday - last edited Yesterday

  @Do-what-I-can Do you have a backup of your controller config, or can you take one? If so, I'd recommend resetting and restoring the config to the controller. 

Also, it would help to update to the latest version for the newest version of the controller. 

Check out our subreddit, r/Omada_Networks! Want to help test and give feedback on new products? Sign up for the US Enterprise Beta Program here! Need a ticket? Contact Technical Support
Recommended Solution
  0  
0
#2
Options
Re:OC200(UN) Ver 2.6 keep's on adopting and disconnecting
Yesterday

  @NeilR_M 

Thank you for the reply, what you sugested was what ended up working, though I got that from tplink tech help, they did have me start with new cable and changing ports, neither of those helped.

So I made a backup, reset the unit and restored unit and that got my devices geting solid conections.

I then went thru and updated everything and all seems well.

  0  
0
#3
Options

Information

Helpful: 0

Views: 57

Replies: 2