How do I install a TP-Link Archer router with a Cable Modem (new logo)?

Released On: 2018-11-27 07:27:44Last update time: 2018-11-27 07:27:44


Please refer to the Quick Installation Guide included in the product package to properly connect the hardware.

Note: please make sure you are able to access internet with a direct connection between your computer and cable modem. If the direct connection doesn’t work, please contact your Internet Service Provider. 

If you are unable to access the internet please try the following steps:

(The Archer A7 is used as an example in this case)


Step 1

Log in to the router’s web-based interface. For login instructions, please refer to the article How to log in to the web-based interface of Wi-Fi Routers (new logo)?


Step 2

Configure the Internet (or WAN) Connection Type:

Select Dynamic IP as the Internet Connection Type on the right of the web page, as shown below, then click Save.


Step 3 

Wait a few minutes, then check the Internet section of the Status page. If it lists an IP address, this means the connection between the Router and the Modem is established. If there is no IP address, please move to step 4.



Step 4

If there is still no IP address, please try the following:

  1. Restart the router first, wait for about 10 seconds, and connect your end-device (i.e. computer or laptop) to the router. 
  2. Power off the modem and unscrew the coaxial cable.
  3. Power on the modem, wait a few moments, then check the status LEDs on the Router. Make sure the WAN/Internet LED  is on.
  4. Reconnect the coaxial cable to the modem and check if you are able to access the internet.

Note: Some cable modems have a back-up battery. To completely restart the cable modem, please take the battery out, then unplug the power source.






pppoe not sport in wan........

firmware downold

qual a melhor configuracao para um TPLink Archer C9 e um TPLink WR941HP com uma banda larga de 300MBPS  vivo.

Alguem pode me dar um help...


Nice work....

Thank you so much for giving such a useful post. 



Thanks for sharing this information.

I have an Archer 20, the box says it's AC4000, and I want to connect it to another router, the TL-ER6020. Is there any reason this won't work? I like the security options for the TL-ER6020 but it doesn't have WiFi capability. I might need to replace my modem so I will try that, but I need to know if I am barking up the wrong tree here in the first place. I live in an apartment and don't need high range for the WiFi, but I know how to hide the SSID and limit the range as needed.

Pl tell how i can configure voice in  ONT Archer 500v . i tried many times but failed


I have a new fire tablet 10hd and it will not connect to wifi. Called tp and amazon and no one can help. I have other amazon products and connects with no issue. Amazon sent me another tablet and does the same thing. It searches and finds other wifi in the area but not mine. Absolutely weird. There seems to be no compatability with the tp link ax3000. Can't send it back because it is 6 weeks old. 

Thank you

Hello, World ! Wi-Fi