Range Extenders
The Range Extender products are mainly designed to extend the coverage of your existing wireless network. For some models they even can be used as Access Point devices. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Range Extenders.
Range Extenders
Lead In After connecting the range extender to the Host router, sometimes you might run into the following issues: There are several new clients under the client list. It seems like your own devices a
By
Jenny_M
Jenny_M1Helpful
1042Views
Dear Team, It has been 5 months since I purchased TP-Link WiFi Range Extender TL-WA850RE, and since the beginning I am am having frequent disconnection issues with the main router. (Every ~5 minutes).
Network Connectivity
By
Neelanshu_1540
· Latest post an hour ago
by Joseph-TP
0Helpful
34Views
Official ReleaseEasyMesh Range Extenders Start Supporting Building a EasyMesh Network via Ethernet Backhaul
This Article Applied to: RE315_V1 RE315_V1_1.0.30 Build 230919 RE900XD_V1 RE900XD_V1_Build_20240411 RE655BE_V1 Supported on the factory firmware. RE800BE_V1 Planned What is EasyMesh with Ethernet Back
Firmware UpdateEasyMeshEasyMesh Ethernet Backhaul
86Helpful
16277Views
I have a VR2100 setup in router mode and 2x mesh nodes an RE305 and RE450 both nodes mesh up no issues with the VR2100 but here is the weird issue, both mesh nodes are setup with static addresses in t
0Helpful
89Views
Hardware Interface 1* 2.5 Gbps LAN Port 4* External Antennas WPS Button WiFi Specification IEEE 802.11be/ax 6 GHz up to 5764 Mbps IEEE 802.11be/ax/ac/n/a 5 GHz up to 4323 Mbps IEEE 802.11be/ax/n/b/g 2
Wi-Fi 7EasyMeshOfficial2.5 Gbps
0Helpful
1281Views
Good afternoon. I acquired the RE330 in August. I need it to extend one network to be used with surveillance cameras. One of the cameras is slightly out of the range of the main router (Archer MR550)
Network Connectivity
By
miracle2012
0Helpful
23Views
Good morning. Sorry in advance since I am not sure about the current firmware version. I installed it yesterday and today I can only access remotely. Anyway it shows me in Tether app that there is an
OneMeshRange Extender
By
miracle2012
· Latest post 20 hours ago
by miracle2012
0Helpful
272Views
When configuring a range extender for the first time, you have to consider that it's DHCP server is set to Auto which may cause some network issues. While this was made to improve the user experience
By
terziyski
· Latest post 23 hours ago
by Ahfdjfhjifhdfxe
4Helpful
3183Views
0Helpful
38Views
Forgot password setup to login to Re300
By
Harshitsaiya
· Latest post Monday
by terziyski
0Helpful
32Views