Powerline Adapters
The Powerline Adapters are mainly designed to extend your network to any room via existing power line. They are quite easy to setup while the transmission is stable and fast. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Powerline Adapters.
Powerline Adapters
This Article Applies to: TL-WPA7510, TL-WPA9610, TL-WPA8730/8630(P) V2, WPA4220 V3, etc. Problem Description/ Phenomenon: What is Smart DHCP, and How does Smart DHCP work? Visit TP-Link Smart DHCP Mak
Highlighted ThreadOfficial
112Helpful
67629Views
Hi Community ! I have a "tp-link tl-pa7017p kit" with two outlets that are disrupting my microwave's clock: the clock is ticking slower than the actual time (about 15 seconds per minute). What can I d
By
VinceDusud
· Latest post Yesterday
by Joseph-TP
0Helpful
30Views
I have an existing powerline network with 2-3 4010 units. One is plugged into the router, the other is two floors up and it usually works fine. Occasionally another 4010 is added and that works fine.
By
PierreSheffield
· Latest post Saturday
by PierreSheffield
0Helpful
48Views
I have an existing Powerline network from my home to my adjacent garage based on AV600 units (TL-PA4010 and/or TL-WPA4220), solely to allow me remote access to a CCTV system in the garage. My router i
Network Connectivity
1Helpful
36Views
We've just changed to BRSK as our internet provider and its the Betternet 1000 that gives you 900Mbps download/upload speeds I've found my TP-Link Powerline kit I've not used for years and thought I w
0Helpful
33Views
I have a TP Link router model VX230 which works really well. I have an AV1300 powerline in a separate building where firstly the upload speed is better than the download but also i am ony getting 1.5m
0Helpful
34Views
Dear all, the Unit with one Ethernet-socket TL-PA8010P died. No LED on anymore. It seems to be a common issue. There are 2 capacitors 6.3V 1000uF used for the DC-DC converter which seem to be at the l
Repair
0Helpful
51Views
Hi. I have an issue but I have a hard time accepting that this would be a hw issue. Every night at about sunset my powerline seams to shape shift into garbage. My setup is as below: From sunset one or
Network Connectivity
0Helpful
85Views
Hello, According to this thread : The TL-WPA4220 is compatible with TL-PA411. Does it apply also to TL-WPA4220P (i'm not sure if it's the same with P) with TL-PA411KIT ? I have only the TL-WPA4220P wi
0Helpful
49Views
I recently added a TL-WPA8631P Extender to my TL-PA9033P powerline network. I used the WPS method to configure the WiFi settings to match the Plusnet Hub Two router, but this only worked for 2.4GHz, d
InstallationWi-Fi Clone
3Helpful
96Views