EAP225-Outdoor, OC200 & Mesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.EAP225-Outdoor, OC200 & Mesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am considering deploying EAP225-Outdoor AP's and an OC200 controller in Mesh mode to provide WiFi outdoors along a creek. The piece of property is about 3/4 mile long.
I've read the Omada Controller UG and have a good understanding of Mesh and how it works, limitations, etc.
- Does it support multiple Root AP's?
- Could I, in theory, use PtP links to extend the Root AP's physically further from the base station?
- Would multiple Root AP's help control the Max 3 Hop issue in the Mesh network?
TIA
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Roger518 - I'm not sure I'm "very familiar" with it, but I have a few in my network. Yes, to use the Mesh function requires you to run the Omada Controller software. You can either purchase an OC200 (OC300 now), or run the controller software on a Windows PC. Either one. But the Omada software is what controls and oversees the Mesh.
Option B: you could try using a TP-Link WR902AC 802.11ac travel router. It has a 'repeater router' function where it connects to the WiFi and repeats it locally. I use this in my RV sometimes at RV parks.
Good luck!
- Copy Link
- Report Inappropriate Content
Hi,
When you have the MESH setup so your second EAP225 is receiving wirelessly, how do you keep the Mesh network running constantly when you turn your computer off?
Can the OC200 Controller fix this?
- Copy Link
- Report Inappropriate Content
Wrxy wrote
Hi,
When you have the MESH setup so your second EAP225 is receiving wirelessly, how do you keep the Mesh network running constantly when you turn your computer off?
Can the OC200 Controller fix this?
Yes, the OC200/OC300 will always keep the Controller online, no need to run a computer.
- Copy Link
- Report Inappropriate Content
Wrxy wrote
Hi,
When you have the MESH setup so your second EAP225 is receiving wirelessly, how do you keep the Mesh network running constantly when you turn your computer off?
Can the OC200 Controller fix this?
As @jonas said, yes.
Unless you want to try and make the software run on a Raspberry Pi (which you CAN do), just get the OC200/300. They make this whole Mesh process MUCH easier, IMHO.
- Copy Link
- Report Inappropriate Content
Wrxy wrote
Hi,
When you have the MESH setup so your second EAP225 is receiving wirelessly, how do you keep the Mesh network running constantly when you turn your computer off?
Can the OC200 Controller fix this?
As @jonas said, yes.
Unless you want to try and make the software run on a Raspberry Pi (which you CAN do), just get the OC200/300. They make this whole Mesh process MUCH easier, IMHO.
- Copy Link
- Report Inappropriate Content
Indeed, one of the best $87 I've spent (OC-200)
https://www.amazon.com/TP-Link-OC200-Omada-Network-Controller/dp/B07GX6GVB6/ref=sr_1_3?dchild=1&keywords=OC200&qid=1610479497&sr=8-3
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5659
Replies: 16
Voters 0
No one has voted for it yet.