Business Community > Pharos Wireless Bridges > Point to MultiPoint Using TP-Link CPE710
< Pharos Wireless Bridges

Point to MultiPoint Using TP-Link CPE710

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Point to MultiPoint Using TP-Link CPE710

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Point to MultiPoint Using TP-Link CPE710
Point to MultiPoint Using TP-Link CPE710
2020-11-18 04:21:12 - last edited 2020-11-18 06:47:28

 

Hello Community,

 

 

I've been planning to expand my business of Point to Multipoint, this is the diagram of my 20 possible clients , they are in different to location so im planning to get 4 pieces to CPE710 to cover the 360deg area, right? 

 

On my base station, 4 piece of TP-Link CPE710 and for the clients are different CPE, TP-Link CPE710( for far clients), TP-Link CPE610 and  TP-Link CPE510, is this good?  

 

 

 

EDIT: Is that the best device for PtMP?

 

Thank you. 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Point to MultiPoint Using TP-Link CPE710
2020-11-20 02:10:32

Dear @Mellx1,

 

I've been planning to expand my business of Point to Multipoint, this is the diagram of my 20 possible clients , they are in different to location so im planning to get 4 pieces to CPE710 to cover the 360deg area, right? 

On my base station, 4 piece of TP-Link CPE710 and for the clients are different CPE, TP-Link CPE710( for far clients), TP-Link CPE610 and  TP-Link CPE510, is this good?  

 

I don't think 4 pieces of CPE710 can cover the 360° area. The CPE710 is equipped with directional antennas and the Antenna Beamwidth is 9° (Azimuth)/7° (Elevation). If you want to use the CPE710 on the base station, you may add need more pieces.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Point to MultiPoint Using TP-Link CPE710
2020-11-20 05:00:14 - last edited 2020-11-20 09:57:05

9° (Azimuth)/7° (Elevation)

gosh! 9degree??? pretty good for ptp.

 

maybe i'll switch to CPE510? both clients and ap is CPE510 ... 

 

Edit: In 1 CPE510, how many clients can connect? 

  0  
  0  
#3
Options
Re:Point to MultiPoint Using TP-Link CPE710
2020-11-30 07:27:57

Dear @Mellx1,

 

Edit: In 1 CPE510, how many clients can connect? 

 

For PtP/PtMP topology, 20-50 clients; Fo hotspot WiFi topology, then 15-20 clients.

 

Note: the value above is for reference only.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 3437

Replies: 3

Related Articles
 Multipoint for CPE710
2140 0
Tp-link cpe710
520 0
 POINT TO MULTIPOINT LINK
1684 0
 Point to multipoint
735 0
 Point to multipoint
688 0
 Double point to multipoint to switch ?
739 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.