Business Community > Controllers > Bad reliability when OC200 connected directly to ER605 router
< Controllers

Bad reliability when OC200 connected directly to ER605 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bad reliability when OC200 connected directly to ER605 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bad reliability when OC200 connected directly to ER605 router
Bad reliability when OC200 connected directly to ER605 router
2022-07-02 11:44:59

This network layout with the OC200 connected to a LAN port of the ER605 router causes the ER605 to have constant disconnects / adopt / provision / configure loops

This config, with the OC200 attached to the top level switch is stable

Why is this...? Surely the first layout with the controller DIRECTLY connected to the router should be as, if not more reliable ???

  0      
 
  0      
 
#1
Options
3 Reply
Re:Bad reliability when OC200 connected directly to ER605 router
2022-07-05 06:21:17

  @Tescophil 

 

I'm still a bit curious if the OC200 is powered the same way in both topologies you've done? Both are Micro USB powered?
Or is the second one powered by a POE switch?

 

Also in both topologies, is the network cable connected to the OC200, router the same? Length quality and such.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Bad reliability when OC200 connected directly to ER605 router
2022-07-05 06:30:14

  @Virgo 

 

Same cable and I've tried both USB and PoE power.

 

I'm rapidly coming to the conclusion that it's the router which is flakey. Had the APs and switches for over a year without any problems. All my issues have been since I added the router in order to have a fully integrated system.

 

When it works it's great...

 

I currently have the OC200 plugged directly back into the router, power cycled both and it's been fine for the last 24 hours 🤞

  1  
  1  
#3
Options
Re:Bad reliability when OC200 connected directly to ER605 router
2022-07-10 22:45:28 - last edited 2022-07-10 22:46:34

  @Tescophil 

 

Crapped out after a few days, the router shows up as disconnected in the client list even though the controller is directly connected to the router...

 

Plug the controller into the switch and the router reconnects....

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 649

Replies: 3

Related Articles
16ports switch connected directly to OMADA ER605
380 1
No internet when ER7206 is directly connected to ISP through WAN2
495 0
 OC200 not connected to Internet
7430 0
 Access points only works when connected directly to switch
3379 0
 Unable to ping PC connected directly to TL-R600VPN
891 0
 Access-Point only working when connected to omada switch directly
1117 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.