Connected Without internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connected Without internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connected Without internet
Connected Without internet
2022-11-27 08:01:04 - last edited 2022-12-07 00:51:36
Tags: #Connected without internet
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.2.3 Build 20221104 Rel.41500

Hi all,

 

Am having severe trouble with 2 of my sites , i have 180 Clients and Connection of 500MB download, Rate limit per client is 2.1Mbps download and 700kbps upload

 

I am having continuous complaints form the sites of clients connected to SSIDs but not able to get internet connection, I have been struggling with this issue for a long while now i have read multiple forums and am not able to find a solution, i have reduced the client speed and rate limits down to 1Mbps as well but still am face this issue and loads of complaint of bad internet.

 

My setup includes following :-

 

OC300 V 1.0

TL-ER7206 v1.0   1.2.3 Build 20221104 Rel.41500

2X TL-SG2428P v1.0  1.1.5 Build 20220909 Rel.75392

EAP115 and 225 and Outdoor EAP225

 

I am Sharing some screen shot of the configuration , i have removed the SSID and Rate limit names from the screen shot below.

 

Would greatly appreciate your help and response.

 

 

 

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Connected Without internet -Solution
2022-12-07 00:51:30 - last edited 2022-12-07 10:19:36

Solved

 

Only DNS had to be set manually under LAN settings. The client devices were getting primary DNS as gateway 10.0.0.1 and were not able to get Internet connectivity

 

Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Connected Without internet
2022-11-29 06:43:59

  @Kash01976 

 

First of all there are quite a few back-end clients, taking full account of the gateway's ability to carry the volume of machines.

Also the 2.4G band is very crowded and it is not a wise decision to put all the clients on 2.4G, 5G is a better choice.

 

In addition, 500M is not a very high bandwidth, and all things considered, it is normal for clients on such a large network to have problems with network instability.

 

It is advisable to consider the problem in terms of upgrading the network and improving the network environment.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Connected Without internet
2022-11-29 10:15:51

  @Virgo 

 

Thank you so much for your kind response 

 

First of all there are quite a few back-end clients, taking full account of the gateway's ability to carry the volume of machines.

 

Could you please elaborate on backend clients and if this is something detrimental to the system performance how do i fix it.

 

Also the 2.4G band is very crowded and it is not a wise decision to put all the clients on 2.4G, 5G is a better choice.

 

I have already changed and opened the 5G radio channels , thank you for this recommendation.

 

In addition, 500M is not a very high bandwidth, and all things considered, it is normal for clients on such a large network to have problems with network instability.

 

I have a second WAN2 Line shooting 200Mbps and i did use this to support my system but i am not well versed as to the configurations of this, in the load balance Boxes i had input 3:1  or 500 : 200 but i was still facing this issue of constant complains of no internet connection while clients are connected to WiFi. So total Network speed combined is 700M

 

It is advisable to consider the problem in terms of upgrading the network and improving the network environment.

 

What would be the recommended Net Speed to serve 180 Clients rate limited to 2.3Mbps download and 650Kbps uploads.

Also could you please recommend upload speed for Nominal Video calling Like BOTIM and SKYPE, since the network upload is limited to 300Mbps and 20 Mbps respectively.

 

 

 

 

 

  0  
  0  
#3
Options
Re:Connected Without internet -Solution
2022-12-07 00:51:30 - last edited 2022-12-07 10:19:36

Solved

 

Only DNS had to be set manually under LAN settings. The client devices were getting primary DNS as gateway 10.0.0.1 and were not able to get Internet connectivity

 

Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 261

Replies: 3

Tags

Connected without internet
Related Articles