Business Community > Controllers > vlan set up with non omada switch in omada network
< Controllers

vlan set up with non omada switch in omada network

vlan set up with non omada switch in omada network

vlan set up with non omada switch in omada network
vlan set up with non omada switch in omada network
2025-05-05 12:41:36 - last edited 2025-05-06 09:39:10
Model: OC200  
Hardware Version: V1
Firmware Version:

new network setup


hardware
ER605 gateway
OC200 controller
EA225
TL-SG108PE smart switch

 

I want to set up network using the above hardware with 2 VLANs. Am i right that because the smart switch is not omada compatible i have to set up the vlans in the switch first then mimic the settings in the controller?

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re: vlan set up with non omada switch in omada network-Solution
2025-05-05 19:53:20 - last edited 2025-05-06 09:39:10

  @corkscrew22 

 

Yes you will need to manually set up the vlans and port PVIDs on the switch, but it will work fine with the rest of your omada system

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re: vlan set up with non omada switch in omada network-Solution
2025-05-05 19:53:20 - last edited 2025-05-06 09:39:10

  @corkscrew22 

 

Yes you will need to manually set up the vlans and port PVIDs on the switch, but it will work fine with the rest of your omada system

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 163

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.