In reviewing the incompatible features of my EAP610 (v3.0) and EAP650-Desktop (v1.0) devices, the PPSK feature states in the capability description the following:

The device does not support Rate Limit and expiration settings
The device supports 1024 (or 128) items

When expanding the feature with the + icon, under Name, I am seeing some SSIDs being duplicated and other SSIDs that no longer exist in the network.  For example, in the screenshot below the WiFi_4880 SSID is listed twice and the WiFi_2880_5G SSID no longer exists.

After doing a Force Provision, reboot, and power cycle, the EAP continues to show the same results.  I also have rebooted the OC300 controller.  Can someone confirm that this is a firmware compatibility issue with the controller’s v6.2 firmware?

On a related matter, the expanded description states “The device does not support the Rate Limit and expiration settings configured in this configuration entry. The entry will not be delivered to the device.”  Does this mean that only these two settings are not sent to the device or does it mean the entire configuration entry is not delivered?  If it is only the two settings that are affected, then the wording should be changed to “These settings will not be delivered to the device.”