SOHO Switches
I have a TL-SF1008P PoE switch and its original power supply is lost. It is rated for 48V 1.25A power supply. I have with me 53.5V 1.3A power supply from Tp-link. I want to know if I can use this powe
PoEpower
2Helpful
515Views
Hi All, I am cascading POE Switches for my CCTV network due to distance and topology. I have connected POE Switch to NVR with a 2meter cable. The above POE switch connected to Second POE switch Port 1
PoEConfiguration
By
Srinivas127
· Latest post 2025-06-09 02:21:08
by Clive_A
1Helpful
240Views
Hi Team, I recently purchased a Raspberry Pi 5, along with a Waveshare PoE HAT (G) and a TP-Link TL-SG105MPE PoE+ switch. While the Raspberry Pi 5 functions perfectly with its official 27W power adapt
PoE
0Helpful
1684Views
The TL-SG116P data sheet gives only the maximum power consumption. I want to know how much the switch consumes on its own, without POE devices connected. I know my devices' consumption is very low, an
PoE
By
VPinPanama
· Latest post 2024-12-16 02:43:30
by Clive_A
1Helpful
755Views
Not able to turn on PoE, it doesn't work no matter what I do. they all show as OFF and ive a POE device in there that is not powered on. What is going on?
PoE
1Helpful
479Views
Hi, I want to avoid installing another power adapter for a smart home bridge (to control the heating in my apartment) to reduce the mess. The bridge requires 100mbit LAN for data and micro-USB for pow
PoE
1Helpful
429Views
Hi, I'm already struggling couple of days with the topic so i need your help :) Lets start with the topology description ROUTER 1 -> ROUTER2 (access point) -> ROUTER3 (access point) -> SG108PE -> EAP1
ConfigurationPoENetwork ConnectivityFirmware Update
1Helpful
677Views
I'm not getting my Poe to work on this switch. I now it's not the cables or my equipment. If I hook it up to my old BV switch it works fine. Is this just a bad switch. It's supposed to be plug and pla
PoE
By
Foodslayer73
· Latest post 2024-09-05 01:46:26
by Clive_A
2Helpful
756Views
I have an 8-port TL-SG2210P POE switch and a TP-Link Tapo-C320ws camera. I understand that the camera is not natively a POE camera. But I have a splitter to take POE power and break it out for the cam
ConfigurationPoENetwork Connectivity
5Helpful
2875Views
Wondering if anyone has had the same issue. We have the TL-SG1218MP (UN) and 4 EAP110-outdoor APs. The issue is the POE switch can't power the APs. I attached the OC200 controller to the switch and it
PoE
2Helpful
521Views