Mixed EAP AP setup -> DHCP not working on EAP225
Hi
In my cluster I have different AP
2piece: EAP110(EU) |
1.0/2.0 |
1.3.0 Build 20180418 Rel. 74831 |
1piece:EAP110-Outdoor(EU) |
1.0 |
1.2.0 Build 20180418 Rel. 74942 |
1piece: EAP225(EU) |
3.0 |
2.3.0 Build 20180628 Rel. 54512 |
- VLAN & Switch confiugration, channel setup working well.
- EAP Controller running on Ubuntu16.10
- EAP version: 3.0.2 (but had the same issue with older versions too)
If 225 is added to Omada Controller then DHCP response didn't arrive to the client, I could see DHCPRequest message on the network from those clients who were connected to EAP255 but clients never got DHCP address, just repeated sequencially the request. Connecting to other AP and roaming between them is seamless.
Roaming between AP sometimes working from EAP110 to EAP225
But when EAP225 is removed from Omada Controller and has the same VLAN, SSID,password setup like the others as standalone, then DHCP answer arrives immediatly and network connection is good.
Does anybody had the same issue? Maybe because HW version is different that causing the issue?
Same problem on laptops, tables, chromecast, phones.