Business CommunityGatewaysAfter updating the firmware do not access the firewall.
Gateways

After updating the firmware do not access the firewall.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

After updating the firmware do not access the firewall.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After updating the firmware do not access the firewall.
After updating the firmware do not access the firewall.
2019-06-18 16:28:52 - last edited 2021-04-19 12:08:33
Model: TL-R480T+  
Hardware Version: V5
Firmware Version:

Hello guys, after updating the firmware of the TL-R480T + I can no longer access it.

I tried to perform a manual reset, but it isnot resetting, the LED SYS does not blink.

I tried to connect thenotebook directly but all the connections are disabled (tested on all ports).

What can I do in this case after all these tests?

  0      
0
#1
Options
3 Reply
Re:After updating the firmware do not access the firewall.
2019-06-19 15:57:48 - last edited 2021-04-19 12:08:33
Just go to serivce-center, nothing you can do.
  1  
1
#2
Options
Re:After updating the firmware do not access the firewall.
2019-06-20 01:04:49 - last edited 2021-04-19 12:08:33

Press the reset button for 4-6 seconds. Wait for the router reboot automatically. If still cannot reset he router and SYS LED doesn't blink, maybe the router is damaged.

  1  
1
#3
Options
Re:Re:After updating the firmware do not access the firewall.
2019-06-21 14:21:39 - last edited 2021-04-19 12:08:33

That's right, I tried to perform the reset this way but the SYS led doesn't blink. I believe it was damaged.

Obrigado, Tks.

  0  
0
#4
Options

Information

Helpful: 0

Views: 1747

Replies: 3